|
|
Can I put my ADL or BDL rifle in to one of the Detachable magazine stocks so I can use detachable magazines?
No, the feed lips on the BDL and ADL rifles are cut into the bottom of the action and the feed lips on the detachable magazine rifles are on the top of the magazine.
|
|
|
Caution if you are ordering a short action Savage stock.
Caution if you are ordering a short action Savage stock check the center to center on the action screws, if your stock is the new controlled feed with a measurement of 4.408 inches you will need to order the stock for the Controlled feed rifle. The standard short action stock will not fit.
|
|
|
Do I use my floor plate from my BDL Rem. 700 Rifle on your Sniper or Varmint stock?
No our stock does not use the floor plate that comes with your BDL rife. The bottom of our stock is not cut to take the tirgger guard from the original stock.
|
|
|
Do you make a Sniper or Varmint stock that will fit my Savage rifle?
We make a stock for all the current production Savage rifles except the detachable magazine rifles. Our stocks will not fit the J series rifles which have a diffrent hole spread for the action bolts. These rifles were made between 1978 & 1985, the center to center on the action scerws on this modle is 4 1/2 inches. Our stocks will fit the rifles that have a center to center hole spread of 4.275 inches for the short action model 10,11,12 and 16 and will fit the model 110,111,112, 113,114 and 116 with a hole spread of 5.062 inches.
|
|
|
Does the Sniper or Varmint stock come with a bipod? What kind of bipod do you recommend?
No, we do not supply a bipod with the stock. We recommend Harris bipods for use on our bipod adapter.
|
|
|
How much does the Sniper stock weigh?
The Sniper stock weighs 6 pounds 14 oz.
|
|
|
How much does the Varmint stock weigh?
The Varmint stock weighs 4 pounds.
|
|
|
Is my Savage a long or short action?
Some of the older long action Savage 110 rifle will take the traditional short action calibers like 223,243 or 308. This has caused some confusion because the newer short action modle 10 rifles are in these calibers. The best way to tell what action length you have is to measure from center to center of the action screws. The long action is 5.062 inches center to center, the short action is 4.275 inches center to center.
|
|
|
There is a gap under the back of my receiver. Is this right?
The action should only touch on the V of the bedding block and back of the recoil lug. The gap at the back is nomal.
|
|
|
What kind of bipod do you recommend?
We recommend Harris bipods for use on the stock.
|
|
|
What Remington rifle will your stock fit?
Our Sniper and Varmint stocks will fit the Current production Mod 700 long and short action in right and left hand. We also make a shourt action Varmint and Sniper stocks for the detachable magzine rifles. It will fit Sportsman 78 the 721,722 and some 40X actions. It will not fit the long action detachable magazine rifles or the 710, mod 7 or the XP100 actions.
|
|
|
Why do you use the adapter for the bipod rail to hold the bipod?
This makes it easy to remove the bipod if you want to use it on sandbags or to shoot off hand. You can also change bipods very quickly to go from a short one for shooting off a bench or prone to a long one to shoot from a seting poshion.(Note : The bipod will not touch the bottom of the stock.)
|
|
|
Will my Savage in 7mm STW or 300 Ult Mag work in your stock?
Yes, but there will have to be .200 of an inch removed from the back of the magazine box. The stock will work well under the stress of the larger calibers.
|
|
|
