Winchester 70 Short Action Sniper

$238.14

Winchester 70 Short Action Sniper

Description

Fits Winchester mod 70 short action rifles with 7.031 inch action screw spacing. This stock uses a blind bottom magazine box. Will not fit the Winchester Super Short Magnum actions or pre64 actions.

DESIGNED BY MAJ. JOHN PLASTER U.S. ARMY( RET.) Author of “The Ultimate Sniper: An Advanced Training Manual for Military and Police Snipers”

The heart of the stock is the Aluminum bedding block with pressed in Aluminum pillars. The rifle only touches the bedding block and not the stock. Designed to fit barrels up to 1.25 inches. The stock comes with an adjustable butt pad that has a range of adjustment of one inch up and one inch down from center and uses spacers to adjust the length of pull. The stock comes with one half inch spacer. You can order more spacers to increase the length of pull up to 1 1/4 inches over what comes on the stock which is 13 3/4 of an inch. Also included with the stock are two different cheek pieces that are .650 tall and .900 tall. There are three mounting points on the top of the stock so you can adjust the position of the cheek piece to suit your need. The bottom of the front of the stock has a rail system that allows the use of different adaptors to mount a bipod to the front of the stock. The stock comes with a quick detach adaptor part # 22-05-02 that works with most Harris bipods. You can also get the non quick detach adaptor from us part # 22-05-04. Among the many features of the stock are the side mounted sling loops that allow you to carry the rifle flat on you back to protect the scope. The mono pod at the butt end of the stock makes a solid three point shooting platform. You can down load the full description of the stock from our download section and also find more info in our F.A.Q section.

Weight- 6 lb 14oz

L.O.P.- no spacers/ 13 in

Additional information

Weight 8.0000 lbs
Dimensions 35.25 × 6.5 × 2.5 in